<?php
/*
miniProxy – A simple PHP web proxy. <https://github.com/joshdick/miniProxy>
Written and maintained by Joshua Dick <http://joshdick.net>.
miniProxy is licensed under the GNU GPL v3 <http://www.gnu.org/licenses/gpl.html>.
*/

/****************************** START CONFIGURATION ******************************/

//To allow proxying any URL, set $whitelistPatterns to an empty array (the default).
//To only allow proxying of specific URLs (whitelist), add corresponding regular expressions
//to the $whitelistPatterns array. Enter the most specific patterns possible, to prevent possible abuse.
//You can optionally use the “getHostnamePattern()” helper function to build a regular expression that
//matches all URLs for a given hostname.
$whitelistPatterns = array(
  //Usage example: To support any URL at example.net, including sub-domains, uncomment the
  //line below (which is equivalent to [ @^https?://([a-z0-9-]+\.)*example\.net@i ]):
  //getHostnamePattern(“example.net”)
);

//To enable CORS (cross-origin resource sharing) for proxied sites, set $forceCORS to true.
$forceCORS = false;

/****************************** END CONFIGURATION ******************************/

ob_start(“ob_gzhandler”);

if (!function_exists(“curl_init”)) die (“This proxy requires PHP’s cURL extension. Please install/enable it on your server and try again.”);

//Helper function for use inside $whitelistPatterns.
//Returns a regex that matches all HTTP[S] URLs for a given hostname.
function getHostnamePattern($hostname) {
  $escapedHostname = str_replace(“.”, “\.”, $hostname);
  return “@^https?://([a-z0-9-]+\.)*” . $escapedHostname . “@i”;
}

//Helper function used to removes/unset keys from an associative array using case insensitive matching
function removeKeys(&$assoc, $keys2remove) {
  $keys = array_keys($assoc);
  $map = array();
  foreach ($keys as $key) {
     $map[strtolower($key)] = $key;
  }

  foreach ($keys2remove as $key) {
    $key = strtolower($key);
    if (isset($map[$key])) {
       unset($assoc[$map[$key]]);
    }
  }
}

if (!function_exists(“getallheaders”)) {
  //Adapted from http://www.php.net/manual/en/function.getallheaders.php#99814
  function getallheaders() {
    $result = array();
    foreach($_SERVER as $key => $value) {
      if (substr($key, 0, 5) == “HTTP_”) {
        $key = str_replace(” “, “-“, ucwords(strtolower(str_replace(“_”, ” “, substr($key, 5)))));
        $result[$key] = $value;
      }
    }
    return $result;
  }
}

define(“PROXY_PREFIX”, “http” . (isset($_SERVER[‘HTTPS’]) ? “s” : “”) . “://” . $_SERVER[“SERVER_NAME”] . ($_SERVER[“SERVER_PORT”] != 80 ? “:” . $_SERVER[“SERVER_PORT”] : “”) . $_SERVER[“SCRIPT_NAME”] . “/”);

//Makes an HTTP request via cURL, using request data that was passed directly to this script.
function makeRequest($url) {

  //Tell cURL to make the request using the brower’s user-agent if there is one, or a fallback user-agent otherwise.
  $user_agent = $_SERVER[“HTTP_USER_AGENT”];
  if (empty($user_agent)) {
    $user_agent = “Mozilla/5.0 (compatible; miniProxy)”;
  }
  $ch = curl_init();
  curl_setopt($ch, CURLOPT_USERAGENT, $user_agent);

  //Get ready to proxy the browser’s request headers…
  $browserRequestHeaders = getallheaders();

  //…but let cURL set some headers on its own.
  removeKeys($browserRequestHeaders, array(
    “Host”,
    “Content-Length”,
    “Accept-Encoding” //Throw away the browser’s Accept-Encoding header if any and let cURL make the request using gzip if possible.
  ));

  curl_setopt($ch, CURLOPT_ENCODING, “”);
  //Transform the associative array from getallheaders() into an
  //indexed array of header strings to be passed to cURL.
  $curlRequestHeaders = array();
  foreach ($browserRequestHeaders as $name => $value) {
    $curlRequestHeaders[] = $name . “: ” . $value;
  }
  curl_setopt($ch, CURLOPT_HTTPHEADER, $curlRequestHeaders);

  //Proxy any received GET/POST/PUT data.
  switch ($_SERVER[“REQUEST_METHOD”]) {
    case “POST”:
      curl_setopt($ch, CURLOPT_POST, true);
      //For some reason, $HTTP_RAW_POST_DATA isn’t working as documented at
      //http://php.net/manual/en/reserved.variables.httprawpostdata.php
      //but the php://input method works. This is likely to be flaky
      //across different server environments.
      //More info here: http://stackoverflow.com/questions/8899239/http-raw-post-data-not-being-populated-after-upgrade-to-php-5-3
      curl_setopt($ch, CURLOPT_POSTFIELDS, file_get_contents(‘php://input’));
    break;
    case “PUT”:
      curl_setopt($ch, CURLOPT_PUT, true);
      curl_setopt($ch, CURLOPT_INFILE, fopen(‘php://input’, ‘r’));
    break;
  }

  //Other cURL options.
  curl_setopt($ch, CURLOPT_HEADER, true);
  curl_setopt($ch, CURLOPT_FOLLOWLOCATION, true);
  curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);
  curl_setopt ($ch, CURLOPT_FAILONERROR, true);

  //Set the request URL.
  curl_setopt($ch, CURLOPT_URL, $url);
  curl_setopt($ch, CURLOPT_PROXY, “37.187.118.56:80”);//proxy的proxy轉第二次 jash.liao add at 2016/05/19 AM11:46

  //Make the request.
  $response = curl_exec($ch);
  $responseInfo = curl_getinfo($ch);
  $headerSize = curl_getinfo($ch, CURLINFO_HEADER_SIZE);
  curl_close($ch);

  //Setting CURLOPT_HEADER to true above forces the response headers and body
  //to be output together–separate them.
  $responseHeaders = substr($response, 0, $headerSize);
  $responseBody = substr($response, $headerSize);

  return array(“headers” => $responseHeaders, “body” => $responseBody, “responseInfo” => $responseInfo);
}

//Converts relative URLs to absolute ones, given a base URL.
//Modified version of code found at http://nashruddin.com/PHP_Script_for_Converting_Relative_to_Absolute_URL
function rel2abs($rel, $base) {
  if (empty($rel)) $rel = “.”;
  if (parse_url($rel, PHP_URL_SCHEME) != “” || strpos($rel, “//”) === 0) return $rel; //Return if already an absolute URL
  if ($rel[0] == “#” || $rel[0] == “?”) return $base.$rel; //Queries and anchors
  extract(parse_url($base)); //Parse base URL and convert to local variables: $scheme, $host, $path
  $path = isset($path) ? preg_replace(‘#/[^/]*$#’, “”, $path) : “/”; //Remove non-directory element from path
  if ($rel[0] == ‘/’) $path = “”; //Destroy path if relative url points to root
  $port = isset($port) && $port != 80 ? “:” . $port : “”;
  $auth = “”;
  if (isset($user)) {
    $auth = $user;
    if (isset($pass)) {
      $auth .= “:” . $pass;
    }
    $auth .= “@”;
  }
  $abs = “$auth$host$port$path/$rel”; //Dirty absolute URL
  for ($n = 1; $n > 0; $abs = preg_replace(array(“#(/\.?/)#”, “#/(?!\.\.)[^/]+/\.\./#”), “/”, $abs, -1, $n)) {} //Replace ‘//’ or ‘/./’ or ‘/foo/../’ with ‘/’
  return $scheme . “://” . $abs; //Absolute URL is ready.
}

//Proxify contents of url() references in blocks of CSS text.
function proxifyCSS($css, $baseURL) {
  return preg_replace_callback(
    ‘/url\((.*?)\)/i’,
    function($matches) use ($baseURL) {
        $url = $matches[1];
        //Remove any surrounding single or double quotes from the URL so it can be passed to rel2abs – the quotes are optional in CSS
        //Assume that if there is a leading quote then there should be a trailing quote, so just use trim() to remove them
        if (strpos($url, “‘”) === 0) {
          $url = trim($url, “‘”);
        }
        if (strpos($url, “\””) === 0) {
          $url = trim($url, “\””);
        }
        if (stripos($url, “data:”) === 0) return “url(” . $url . “)”; //The URL isn’t an HTTP URL but is actual binary data. Don’t proxify it.
        return “url(” . PROXY_PREFIX . rel2abs($url, $baseURL) . “)”;
    },
    $css);
}

//Extract and sanitize the requested URL.
$url = substr($_SERVER[“REQUEST_URI”], strlen($_SERVER[“SCRIPT_NAME”]) + 1);//程式進入點 at 2016/05/19 AM11:46
if (empty($url)) {
    die(“<html><head><title>miniProxy</title></head><body><h1>Welcome to miniProxy!</h1>miniProxy can be directly invoked like this: <a href=\”” . PROXY_PREFIX . “http://example.net/\”>” . PROXY_PREFIX . “http://example.net/</a><br /><br />Or, you can simply enter a URL below:<br /><br /><form onsubmit=\”window.location.href='” . PROXY_PREFIX . “‘ + document.getElementById(‘site’).value; return false;\”><input id=\”site\” type=\”text\” size=\”50\” /><input type=\”submit\” value=\”Proxy It!\” /></form></body></html>”);
} else if (strpos($url, “:/”) !== strpos($url, “://”)) {
    //Work around the fact that some web servers (e.g. IIS 8.5) change double slashes appearing in the URL to a single slash.
    //See https://github.com/joshdick/miniProxy/pull/14
    $pos = strpos($url, “:/”);
    $url = substr_replace($url, “://”, $pos, strlen(“:/”));
}
$scheme = parse_url($url, PHP_URL_SCHEME);
if (empty($scheme)) {
  //Assume that any supplied URLs starting with // are HTTP URLs.
  if (strpos($url, “//”) === 0) {
    $url = “http:” . $url;
  }
} else if (!preg_match(“/^https?$/i”, $scheme)) {
    die(‘Error: Detected a “‘ . $scheme . ‘” URL. miniProxy exclusively supports http[s] URLs.’);
}

//Validate the requested URL against the whitelist.
$urlIsValid = count($whitelistPatterns) === 0;
foreach ($whitelistPatterns as $pattern) {
  if (preg_match($pattern, $url)) {
    $urlIsValid = true;
    break;
  }
}
if (!$urlIsValid) {
  die(“Error: The requested URL was disallowed by the server administrator.”);
}

$response = makeRequest($url);
$rawResponseHeaders = $response[“headers”];
$responseBody = $response[“body”];
$responseInfo = $response[“responseInfo”];

//A regex that indicates which server response headers should be stripped out of the proxified response.
$header_blacklist_pattern = “/^Content-Length|^Transfer-Encoding|^Content-Encoding.*gzip/i”;

//cURL can make multiple requests internally (while following 302 redirects), and reports
//headers for every request it makes. Only proxy the last set of received response headers,
//corresponding to the final request made by cURL for any given call to makeRequest().
$responseHeaderBlocks = array_filter(explode(“\r\n\r\n”, $rawResponseHeaders));
$lastHeaderBlock = end($responseHeaderBlocks);
$headerLines = explode(“\r\n”, $lastHeaderBlock);
foreach ($headerLines as $header) {
  $header = trim($header);
  if (!preg_match($header_blacklist_pattern, $header)) {
    header($header);
  }
}
//Prevent robots from indexing proxified pages
header(‘X-Robots-Tag: noindex, nofollow’);

if ($forceCORS) {
  //This logic is based on code found at: http://stackoverflow.com/a/9866124/278810
  //CORS headers sent below may conflict with CORS headers from the original response,
  //so these headers are sent after the original response headers to ensure their values
  //are the ones that actually end up getting sent to the browser.
  //Explicit [ $replace = true ] is used for these headers even though this is PHP’s default behavior.

  //Allow access from any origin.
  header(“Access-Control-Allow-Origin: *”, true);
  header(“Access-Control-Allow-Credentials: true”, true);

  //Handle CORS headers received during OPTIONS requests.
  if ($_SERVER[“REQUEST_METHOD”] == “OPTIONS”) {
    if (isset($_SERVER[“HTTP_ACCESS_CONTROL_REQUEST_METHOD”])) {
      header(“Access-Control-Allow-Methods: GET, POST, OPTIONS”, true);
    }
    if (isset($_SERVER[“HTTP_ACCESS_CONTROL_REQUEST_HEADERS”])) {
      header(“Access-Control-Allow-Headers: {$_SERVER[‘HTTP_ACCESS_CONTROL_REQUEST_HEADERS’]}”, true);
    }
    //No further action is needed for OPTIONS requests.
    exit(0);
  }

}

$contentType = “”;
if (isset($responseInfo[“content_type”])) $contentType = $responseInfo[“content_type”];

//This is presumably a web page, so attempt to proxify the DOM.
if (stripos($contentType, “text/html”) !== false) {

  //Attempt to normalize character encoding.
  $detectedEncoding = mb_detect_encoding($responseBody, “UTF-8, ISO-8859-1”);
  if ($detectedEncoding) {
    $responseBody = mb_convert_encoding($responseBody, “HTML-ENTITIES”, $detectedEncoding);
  }

  //Parse the DOM.
  $doc = new DomDocument();
  @$doc->loadHTML($responseBody);
  $xpath = new DOMXPath($doc);

  //Rewrite forms so that their actions point back to the proxy.
  foreach($xpath->query(‘//form’) as $form) {
    $method = $form->getAttribute(“method”);
    $action = $form->getAttribute(“action”);
    //If the form doesn’t have an action, the action is the page itself.
    //Otherwise, change an existing action to an absolute version.
    $action = empty($action) ? $url : rel2abs($action, $url);
    //Rewrite the form action to point back at the proxy.
    $form->setAttribute(“action”, PROXY_PREFIX . $action);
  }
  //Profixy <style> tags.
  foreach($xpath->query(‘//style’) as $style) {
    $style->nodeValue = proxifyCSS($style->nodeValue, $url);
  }
  //Proxify tags with a “style” attribute.
  foreach ($xpath->query(‘//*[@style]’) as $element) {
    $element->setAttribute(“style”, proxifyCSS($element->getAttribute(“style”), $url));
  }
  //Proxify any of these attributes appearing in any tag.
  $proxifyAttributes = array(“href”, “src”);
  foreach($proxifyAttributes as $attrName) {
    foreach($xpath->query(‘//*[@’ . $attrName . ‘]’) as $element) { //For every element with the given attribute…
      $attrContent = $element->getAttribute($attrName);
      if ($attrName == “href” && (stripos($attrContent, “javascript:”) === 0 || stripos($attrContent, “mailto:”) === 0)) continue;
      $attrContent = rel2abs($attrContent, $url);
      $attrContent = PROXY_PREFIX . $attrContent;
      $element->setAttribute($attrName, $attrContent);
    }
  }

  //Attempt to force AJAX requests to be made through the proxy by
  //wrapping window.XMLHttpRequest.prototype.open in order to make
  //all request URLs absolute and point back to the proxy.
  //The rel2abs() JavaScript function serves the same purpose as the server-side one in this file,
  //but is used in the browser to ensure all AJAX request URLs are absolute and not relative.
  //Uses code from these sources:
  //http://stackoverflow.com/questions/7775767/javascript-overriding-xmlhttprequest-open
  //https://gist.github.com/1088850
  //TODO: This is obviously only useful for browsers that use XMLHttpRequest but
  //it’s better than nothing.

  $head = $xpath->query(‘//head’)->item(0);
  $body = $xpath->query(‘//body’)->item(0);
  $prependElem = $head != NULL ? $head : $body;

  //Only bother trying to apply this hack if the DOM has a <head> or <body> element;
  //insert some JavaScript at the top of whichever is available first.
  //Protects against cases where the server sends a Content-Type of “text/html” when
  //what’s coming back is most likely not actually HTML.
  //TODO: Do this check before attempting to do any sort of DOM parsing?
  if ($prependElem != NULL) {

    $scriptElem = $doc->createElement(“script”,
      ‘(function() {

        if (window.XMLHttpRequest) {

          function parseURI(url) {
            var m = String(url).replace(/^\s+|\s+$/g, “”).match(/^([^:\/?#]+:)?(\/\/(?:[^:@]*(?::[^:@]*)?@)?(([^:\/?#]*)(?::(\d*))?))?([^?#]*)(\?[^#]*)?(#[\s\S]*)?/);
            // authority = “//” + user + “:” + pass “@” + hostname + “:” port
            return (m ? {
              href : m[0] || “”,
              protocol : m[1] || “”,
              authority: m[2] || “”,
              host : m[3] || “”,
              hostname : m[4] || “”,
              port : m[5] || “”,
              pathname : m[6] || “”,
              search : m[7] || “”,
              hash : m[8] || “”
            } : null);
          }

          function rel2abs(base, href) { // RFC 3986

            function removeDotSegments(input) {
              var output = [];
              input.replace(/^(\.\.?(\/|$))+/, “”)
                .replace(/\/(\.(\/|$))+/g, “/”)
                .replace(/\/\.\.$/, “/../”)
                .replace(/\/?[^\/]*/g, function (p) {
                  if (p === “/..”) {
                    output.pop();
                  } else {
                    output.push(p);
                  }
                });
              return output.join(“”).replace(/^\//, input.charAt(0) === “/” ? “/” : “”);
            }

            href = parseURI(href || “”);
            base = parseURI(base || “”);

            return !href || !base ? null : (href.protocol || base.protocol) +
            (href.protocol || href.authority ? href.authority : base.authority) +
            removeDotSegments(href.protocol || href.authority || href.pathname.charAt(0) === “/” ? href.pathname : (href.pathname ? ((base.authority && !base.pathname ? “/” : “”) + base.pathname.slice(0, base.pathname.lastIndexOf(“/”) + 1) + href.pathname) : base.pathname)) +
            (href.protocol || href.authority || href.pathname ? href.search : (href.search || base.search)) +
            href.hash;

          }

          var proxied = window.XMLHttpRequest.prototype.open;
          window.XMLHttpRequest.prototype.open = function() {
              if (arguments[1] !== null && arguments[1] !== undefined) {
                var url = arguments[1];
                url = rel2abs(“‘ . $url . ‘”, url);
                url = “‘ . PROXY_PREFIX . ‘” + url;
                arguments[1] = url;
              }
              return proxied.apply(this, [].slice.call(arguments));
          };

        }

      })();’
    );
    $scriptElem->setAttribute(“type”, “text/javascript”);

    $prependElem->insertBefore($scriptElem, $prependElem->firstChild);

  }

  echo “<!– Proxified page constructed by miniProxy –>\n” . $doc->saveHTML();
} else if (stripos($contentType, “text/css”) !== false) { //This is CSS, so proxify url() references.
  echo proxifyCSS($responseBody, $url);
} else { //This isn’t a web page or CSS, so serve unmodified through the proxy with the correct headers (images, JavaScript, etc.)
  header(“Content-Length: ” . strlen($responseBody));
  echo $responseBody;
}